Raclette Cheese (Recipe and Instructions)

Hello Friends! :)

(Click here to see the taste test video!)

Today I'm posting my recipe and instructions for Raclette Cheese. This is one of my favourite cheeses because it's used in a Raclette machine to melt and pour on top of all sorts of delicious goodies! Alex and I have a tradition where we have a Raclette dinner every New Year's Eve.

"Back in the days, Swiss shepherds from the Valais region needed to bring food up to the Alps that was relatively cheap and wouldn’t spoil easily in the hot summer months. So they brought cheese and potatoes. While the potatoes roasted in the fire, a big piece of cheese was put close to the fire. Once it started melting, the cheese was taken away and scraped onto the baked potatoes. This was not only filling and nourishing but also delicious. In French ‘to scrape’ translates to ‘racler’ and this is where the term Raclette comes from." (raclettecorner.com)

Whatever way you slice it, it's basically melted cheese on whatever food you love. It's a fun meal to have. We found our Raclette machine at a thriftstore for $10 and we've been using it every year since. I'm so happy I can now make the Raclette cheese at home, because it's quite expensive at the store! My wheel should be ready in mid-December, so we may have Raclette for Christmas dinner this year.

Here's how you make it!

Raclette Cheese (for a printable version, click here)
(Recipe courtesy of Gavin Webber)

Yield: 1 kg wheel

Ingredients

10 liters whole milk

1/16 tsp Brevibacterium Linens Culture
1/8 tsp Alp D Culture

1/2 tsp Calcium Chloride

1/4 tsp double rennet

Cool filtered water

Brine

Directions

Stage 1: Mixing The Ingredients

Stage 2: Caring for the curds

Stage 3: Molding, Pressing and Brining

Stage 4: Drying and Aging

Stage 1: Mixing The Ingredients

1. In a double boiler, heat the milk to 88F or 31C.

2. Add the Brevibacterium Linens, then the AlpD Culture and let sit 5 minutes at 88F or 31C.

As you can see, the Brevi Linens are orange in colour. This particular culture develops an orange/red rind around the cheese and gives it flavour and aroma.

This is how the cheese should age, the rind should be an orange/red colour as this photo shows.

3. Stir well for 2 minutes then let ripen for 1 hour and 15 minutes, holding the temperature at 88F or 31C.

4. At about the 1 hour and 10 minute mark, prepare your Calcium Chloride by mixing it with 1/4 cup of cool filtered water. Mix your rennet with 1/4 cup of cool filtered water.

5. Add the Calcium Chloride and stir for 1 minute. Add the rennet and stir for no more than 1 minute.

6. Let sit for 50 minutes holding the temperature at 88F or 31C.

Stage 2: Caring for the curds

7. Check for a clean break. Insert your knife into the curd, if it breaks open a little and comes out clean, you have a clean break.

8. Gently cut the curds with a balloon whisk, using an up and down, side to side and scooping motion.

9. Let heal for 5 minutes

10. Gently stir for 20 minutes, still holding the temperature at 88F or 31C. Let sit for 5 minutes.

11. Meanwhile, heat 3 liters of water to 145F or 63C.

12. Using a strainer and ladle, remove 11 cups of whey.

13. Replace the whey with 11 cups of hot water to wash the curds. Washing the curds lowers the acidity to make a smoother taste. Your temperature should now be at 100F or 38C. 

As you can see, my temperature was at 102F. In order to bring it down to 100F, I removed some whey and poured in a little bit of cool water.

14. Stir for 10 minutes then let sit for 5 minutes.

Stage 3: Molding, Pressing and Brining

15. Drain the curd into a cheesecloth-lined mold. Pull the cheesecloth around the curd to make sure there are no wrinkles, then put on your follower.

16. Press at 11 pounds for 15 minutes.

After 15 minutes, your wheel is SO SO fragile, take care of it very gently!

17. Flip, re-dress and press at 11 pounds for 30 minutes.

18. Flip, re-dress and press at 22 pounds for 1 hour.

19. Flip, re-dress and press at 33 pounds for 12 hours.

20. Put your wheel into a brine solution in the cheese cave for 10 hours, flipping at the 5 hour mark.

Stage 4: Drying and Aging

21. Air dry for 24 hours, flipping it at the 12 hour mark.

22. Your Raclette will age in a ripening box in the cheese cave at 50F or 10C. This is my set up. I use a tupperware container large and deep enough to hold a small dish. That little piece of wet paper towel is put into the tupperware to keep the ripening box humid. I then place a bamboo mat on top of the little dish for air circulation; then my wheel of cheese on top. There is a binder clip on the side of the box to hold the lid from sealing, this also helps with air circulation.

Wash your wheel on the 3rd day, then flip and wash every other day for 1 month; then flip and wash weekly. You are washing the wheel to encourage the Brevi Linens to develop the orange rind. To see my video on how to wash your cheese, click here. 

The total ripening time is 12 weeks then your wheel should be ready to taste!

Note: Every time you take your cheese out to flip and/or wash, always replace everything inside (dish, bamboo mat, wet piece of paper towel) and wipe down the container and lid. Otherwise, little mould bunnies will be secretly forming and contaminating your wheel!

I have multiple amounts of mats and dishes. It's easy to get lazy and skip this step (I've done it and regretted it!) but having a failed cheese is much worse!

Parmesan (Recipe and Instructions)

Hello Everyone!

Today I'm going to show you how to make Parmesan cheese!

What we call "Parm" or "Parmesan" is based on the authentic Parmigiano-Reggiano cheese made in the Parma province of Italy. Appellation Regulations prohibit any cheese maker from calling this style of cheese a Parmigiano-Reggiano unless it's made in Parma, Italy; and unless certain ingredients and methods are used.

Now I don't think the Parma police will find me if I call it a Parmigiano-Reggiano, but I will follow the rules and call it a Parmesan! :) A great example of Appellation Regulations is sparkling wine. Though it may taste like a champagne, if it's not made in Champagne, France - it's illegal to call it a champagne. :) If Scotch whiskey isn't made in Scotland, it can't be called a Scotch, but it can be called a "Blended Whisky" etc...

You get the idea! Let's make cheese!! (Click here for printable instructions)

Parmesan Cheese
(Recipe courtesy of Gavin Webber)
Yield: about 1/2 kg wheel

Ingredients:

7 liters 2% milk

Half of: 3/8 tsp Thermophilic B Culture

1/16th tsp Lipase

Half of: 3/4 tsp Calcium Chloride

Half of: 1/4 tsp + 1/8 tsp Double Rennet

Cheese Brine

Note:  The ingredients have funny measurements because I had to halve the recipe. I didn't have a pot big enough to hold 14 liters of milk!

I've divided the process into 4 steps:

1. Mixing the ingredients

2. Caring for the curds

3. Molding, Pressing and Brining

4. Drying and Aging

Stage 1: Mixing The Ingredients

1. Heat milk to 33C or 91F. I heat mine in a double boiler on the stove, then transfer it to my "sink double boiler". I find it so much easier to regulate the temperature when the pot of milk is sitting in warm water.

2. Add the culture and let sit 5 minutes. After the five minutes, stir well, cover and let sit for 45 minutes.

During the entire process of mixing the ingredients, you need to hold your temperature at 33C or 91F. Milk will do a great job of holding the temperature on its own, but if you have the pot in the sink, you can add hot or cold water to regulate your temperature. It's a lot easier than keeping it on the stove. 

3. About 20 minutes before your milk has finished ripening, prepare your Lipase by stirring it into 1 tbsp cool filtered water. You don't have to use Lipase, but it's highly recommended for certain cheeses because it gives the cheese a sharper flavour. It also helps to break down fat molecules.

I'm putting this out there: My Lipase is two years old and I bought it from a less reputable cheese making organization...so when it comes time to taste the Parm, I will have to remember this!!

4. Add your Lipase after the milk's 45 minute ripening period. Stir well and let sit 15 minutes. Meanwhile prepare your Calcium Chloride by stirring it into 1/8 cup cool filtered water; prepare your rennet by stirring it into 1/8 cup cool filtered water.

5. Add the Calcium Chloride, stir for 1 minute. Add the rennet, stir for 1 minute. Cover and let rest 45-60 minutes.

Stage 2: Caring For The Curds

6. Check for a clean break (mine took 55 minutes). A clean break happens when you insert your finger (clean!) or a knife, lift it out and hardly any residue is on your finger or knife. Kind of like doing a toothpick test when you bake a cake.

7. Cut your curds with a whisk, moving up and down slowly and gently then using a scoop-like motion. They should be about the size of little dried peas.

8. There is no rest time for Parmesan curds. Start to heat the curds to 51C or 124F over ONE HOUR, constantly stirring. Don't rush this!! Be gentle with your curds and really keep an eye on the temperature. Cheese fails are devastating, so really follow instructions to a T!! :)

9. After one hour, test your curds. Take some in your hand, if they form a ball and you can press them apart with your thumb, they are ready to press. (Sorry no photo!) Turn off the heat, cover and let the curds sit for 5 minutes.

3. Molding, Pressing And Brining

10. Drain through a cheese cloth lined mold. Cover the top of the curds with the cheese cloth and then with your follower. Pull the cheese cloth up to make sure it's nice and tight under the follower. My standard mold is about 7 inches in diameter by 3.5 inches high. I don't have a smaller one yet, so my Parm will be very thin compared to cheeses that I make that use 10 liters of milk.

**A tip is to spray the cheese cloth with vinegar so the Parmesan curds won't stick to them.

11. Press at 24 pounds for 30 minutes. I love the water bottle method! It's so easy. Here's a link to my Cheese Press post that describes how I press my cheese.

 Note: Check to make sure your whey is clear. If it's too cloudy, use less weight.

12. Gently remove the cheese from the mold and cheese cloth. Turn, re-dress and press at 50 pounds for 12 hours. This is what the wheel looks like after one hour of pressing.

13. After 12 hours, remove your cheese from the mold and the cheese cloth. It already smells so good at this stage! See what I mean about it being thin?

14. Brine your wheel for 18 hours, flipping at the halfway mark. Keep the brined cheese at around 10C or 50F in your cheese cave. Here is my recipe for Cheese Brine.

4. Drying and Aging

15. Air dry for 3 days, flipping twice daily.

16. After 3 days of drying you're ready to start aging your Parm. You need to age it in a ripening box. This is easy to put together.

I use a plastic box. Because my box is tapered (smaller on the bottom), my cheese wheel doesn't quite fit. To remedy this, I put a bowl in the box, then a plastic mesh piece and a bamboo mat to help with ventilation. I then place the cheese wheel on top. This set up really works well for me. 

Because you need to age Parm at 80-90% humidity, the easiest way to do it is to put a wet piece of paper towel in your ripening box (see the first of four photos). Believe it or not, this actually keeps the humidity at 80-90% with the cover on the ripening box! Just make sure you re-hydrate the paper towel daily to keep the humidity level where you want it. Yes, Parm needs babysitting! :)

17. Age your Parm in your cheese cave at around 10C or 50F, flipping daily for the first week, then weekly for 3 months. After three months you can take your wheel out of the ripening box and vacuum pack it. Keep it in the cheese cave and flip it weekly. It'll be ready any time between 6-12 months. I've read that aging it longer than a year makes it extremely dry.